Squelch Sensitivity; Key Beeps; Transmit (Tx) Power Level Selection - Midland X-TRA TALK MXT100 Owner's Manual

Model MXT100 Series
MONITOR
Pressing the
level of the radio when not receiving a signal. This should be used to check
activity on your current channel before transmitting. Press the
again to disable Monitor mode.

SQUELCH SENSITIVITY

The MXT100 has adjustable squelch sensitivity. The minimum squelch
level of 01 is the most sensitive and will allow the squelch to open on
very weak signals. Setting the squelch to the maximum setting of 09 will
require very strong signals to open the squelch. The default setting is 03
which generally provides reliable squelch operation for most applications.
To adjust the squelch sensitivity, press
F03, then press
level. Press the

KEY BEEPS

The beep tones on your MXT100 are designed to provide audible
feedback whenever a key is pressed. If the beep tone level is too loud or
too soft for your operating environment you can adjust it from off to one
of 8 different levels.
To adjust the key beep level, press
F04, then press
desired level. Press the
selection.

TRANSMIT (TX) POWER LEVEL SELECTION

To adjust the key beep level, press
F05, then press
between HI and Lo power. Press the
confirm your selection.
Page 10
button will let you hear noise so you can adjust the volume
button again. Use the
button or wait 3 seconds to confirm your selection.
button again. Use the
button or wait 3 seconds to confirm your
button again. Use the
button and use
/ buttons to the desired
button and use
/ buttons to select the
button and use
/ buttons to toggle
button or wait 3 seconds to
button
/ to select
/ to select
/ to select
midlandusa.com