Table of Contents
Advertisement
6. When the desired Privacy Code is shown on the LCD display, press the
Monitor/Scan
Monitor/Scan BUTTON TO CONFIRM YOUR SELECTION OR THE PRIVACY CODE
WILL NOT BE CHANGED
NOTE: If you select a CTCSS Privacy Code, any pre-selected DCS
Privacy Code will be cancelled, and vice-versa.
Selecting the Transmit (TX) Power Level
The MXT115 provides two transmit power levels; HI and Lo. The Lo power
level is generally suitable when operating under optimal conditions (see
About Range). The HI power level is recommended to ensure you get
maximum range from your radio.
To adjust the Transmit Power Level:
1. Press and release the Menu
mode.
2. Use the Channel Up
menu options until the LCD display shows Pr.
3. Press the Monitor/Scan
4. Use the Channel Up
transmit power setting between HI and Lo.
5. When the desired transmit power level is shown on the LCD display,
press the Monitor/Scan
MUST PRESS THE MONITOR/SCAN BUTTON TO CONFIRM YOUR SELECTION
OR THE POWER LEVEL WILL NOT BE CHANGED.
Note: Due to output power regulations channels 1 through 7 cannot be
removed from the Lo transmit power setting.
Adjusting Squelch Sensitivity
The MXT115 has adjustable squelch sensitivity. The minimum squelch
level of 00 is the most sensitive, which allows the squelch to open on very
weak signals. Setting the squelch to the maximum setting of 09 requires
very strong signals to open the squelch.
Page 20
/
to confirm your selection.
button to place the radio in "Menu"
or Channel Down
/
button to confirm your selection.
or Channel Down
/
button to confirm your selection.
Model MXT115
YOU MUST PRESS THE
buttons to scroll the
button to toggle the
midlandusa.com
YOU
Advertisement
Table of Contents
