Garmin Zumo XT Owner's Manual page 40

Installing Your Device in the Motorcycle
Mount
1 Fit the bottom of your device into the cradle.
2
Push the top of the device forward until it snaps
into place.
The latch (D on the mount stays up after you
insert the device.
Removing Your Device from the
Motorcycle Mount
1
Press the release button on the top of the mount.
2
Lift out the device.
Mounting Your Device in an
Automobile
NOTICE
Before mounting the device, check the local laws
pertaining to windshield mounting.
This product contains a lithium-ion battery. To
prevent the possibility of personal injury or product
damage caused by battery exposure to extreme heat,
store the device out of direct sunlig~
Do not use the suction cup mount on a motorcy~
See the Important Safety and Product Information
guide in the product box for product warnings and
other important infonnation.
NOTE: The automobile mount is not included with all
device models. Go to garmin.com to purchase
optional accessories.
1
Plug the automotive power cable (D
into the port
®
on the device.
2
Remove the clear plastic from the suction cup@.
3
Clean and dry your windshield and the suction
cup with a lint-free cloth.
4 Press the suction cup to the windshield, and flip
the lever© back toward the windshield.
5
Snap the cradle @onto the suction cup arm.
6
Fit the bottom of your device into the cradle.
7
Press the device into the cradle until it snaps Into
place.
8
Plug the other end of the automotive power cable
into a power outlet.
3