Navigation Settings; Bluetooth Settings; Wi‑Fi Settings; Driver Assistance Settings - Garmin Zumo XT Owner's Manual

Driving Map View: Sets the perspective on the map.
Map Detail: Sets the level of detail on the map. More detail may
cause the map to draw slower.
Map Theme: Changes the color of the map data.
Map Layers: Sets the data that appears on the map page
(Customizing the Map Layers, page
Auto Zoom: Automatically selects the zoom level for optimal
use of your map. When disabled, you must zoom in or out
manually.
Skip Next Stop Confirmation: Sets a confirmation message to
appear when skipping a location on your route.
myMaps: Sets which installed maps the device uses.
Enabling Maps
You can enable map products installed on your device.
TIP: To purchase additional map products, go to
http://buy.garmin.com.
1
Select Settings > Map & Vehicle > myMaps.
2
Select a map.

Navigation Settings

Select Settings > Navigation.
Calculation Mode: Sets the route calculation method.
Off-Route Recalculation: Sets recalculation preferences when
navigating away from an active route.
Avoidances: Sets road features to avoid on a route.
Custom Avoidances: Allows you to avoid specific roads or
areas.
Toll Roads: Sets preferences for avoiding toll roads.
Tolls and Fees: Sets preferences for avoiding toll roads and toll
stickers.
NOTE: This feature is not available in all areas.
Environmental Zones: Sets the avoidance preferences for
areas with environmental or emissions restrictions that may
apply to your vehicle.
Restricted Mode: Disables all functions that require significant
operator attention.
GPS Simulator: Stops the device from receiving a GPS signal,
and saves battery power.
Calculation Mode Settings
Select Settings > Navigation > Calculation Mode.
The route calculation is based on road speeds and vehicle
acceleration data for a given route.
Faster Time: Calculates routes that are faster to drive but can
be longer in distance.
Shorter Distance: Calculates routes that are shorter in distance
but can take more time to drive.
Off Road: Calculates a direct line from your location to your
destination.
Setting a Simulated Location
If you are indoors or not receiving satellite signals, you can use
the GPS simulator to plan routes from a simulated location.
1
Select Settings > Navigation > GPS Simulator.
2
From the main menu, select View Map.
3
Tap the map twice to select an area.
The address of the location appears at the bottom of the
screen.
4
Select the location description.
5 Select Set Location.
18
13).

Bluetooth Settings

Select Settings > Wireless Networks.
Bluetooth: Enables Bluetooth wireless technology.
Search for Devices: Searches for nearby Bluetooth devices.
Friendly Name: Allows you to enter a friendly name that
identifies your device on other devices with Bluetooth
wireless technology.
Wi‑Fi Settings
The wireless network settings allow you to manage Wi‑Fi
networks.
Select Settings > Wireless Networks.
Wi-Fi: Enables the Wi‑Fi radio.
Saved Networks: Allows you to edit or remove saved networks.
Search for Networks: Searches for nearby Wi‑Fi networks
‑ Fi Network, page
(Connecting to a Wi

Driver Assistance Settings

Select Settings > Driver Assistance.
Rider Alerts: Allows you to enable or disable alerts for
upcoming zones or road conditions
Features and Alerts, page
Speeding Alert: Alerts you when you are exceeding the speed
limit.
Route Preview: Shows a preview of the major roads in your
route when you start navigation.
Break Planning: Reminds you to take a break and shows
upcoming services after you drive for an extended time. You
can enable or disable break reminders and upcoming service
suggestions.
Automatic Incident Detection: Enables the device to detect a
possible vehicle incident.
Incident Notification: Allows you to set up a contact to be
notified when the device detects a possible vehicle incident.
Proximity Alerts: Alerts you when you approach speed
cameras or red light cameras.
Display Settings
Select Settings > Display.
Orientation: Allows you to set the display to portrait (vertical) or
landscape (horizontal).
NOTE: This feature is not available on all product models.
Color Mode: Allows you to select day or night color mode. If you
select the Auto option, the device automatically switches to
day or night colors based on the time of day.
Brightness: Allows you to adjust the display brightness.
Display Timeout: Allows you to set the amount of idle time
before your device enters sleep mode while using battery
power.
Screenshot: Allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Traffic Settings
From the main menu, select Settings > Traffic.
Traffic: Enables traffic.
Current Provider: Sets the traffic provider to use for traffic data.
The Auto option selects the best available traffic data
automatically.
Subscriptions: Lists the current traffic subscriptions.
Optimize Route: Enables the device to use optimized alternate
routes automatically or upon request
on Your Route, page 7).
19).
(Rider Awareness
3).
(Avoiding Traffic Delays
zūmo Settings