Table of Contents
Advertisement
TUB CLEAN COURSE
Mold is build-up when the fabric softener comes into contact with Detergent or by the moisture kept in the tub for
some time. If mold is allowed to build-up in the machine it can result in stains on your clothes or unpleasant smell
in your washer. In this case, use this program to clean inner tub and outer tub with a recommended cleaning
solution.
Press the POWER button to turn on power on.
Press COURSE button to select the 『Tub Clean』 course.
Press the STAR/PAUSE button.
Remaining time will be displayed on screen.
After put in exclusive detergent for laundry tub or oxide bleaching agent in
the bleaching agent input and close door.
• During the process of soaking, the tub will turn and stop repeatedly. This is a
When the wash program ends, the buzzer will ring for 10 seconds
before the Power goes off automatically.
● Recommended detergent or cleaning agents : oxygen bleach, oxygen cleaning product
- Use following the instructions.
● Do not place laundry when selecting the Tub Clean cycle.
● Clean the washer tub once a month using the Tub Clean cycle.
● If lint appears on clothes, run the Tub Clean cycle.
● It is convenient if running the Tub Clean cycle when you go out or at night time.
● Do not use chloride bleach or acidic cleaning product because it discolors or corrodes
stainless and other parts of the washer.
Automatic detection of time to clean Tub
●
After Power On button pressing, if
Cleaning.
●
If you want to skip the Tub Clean, press option buttons to select desired cycle.
●
After performing tub clean,
●
Tub Clean time is detected automatically as per the usages of washer (Generally once
after 30 usages)
normal operation to enhance cleaning by activating the detergent enzyme.
will disappear until next cleaning time.
is blinking in the display, it is the time for Tub
21
Advertisement
Table of Contents
