LG T2727S0Z User Manual page 62

NORMAL COURSE
1
2
3
4
5
14
Press the POWER button to turn on power on.
• The light will be on at the Normal on the panel..
Add the laundry and close the door. Press the STAR/PAUSE button.
• This course is programmed for water wave in 『Medium』 , Cold water and Rinse 『2』 times.
You may change the laundry option as you wish.
• Keep press 『Water Wave』 button to change to 『Weak』 if you want to reduce lint.
Tub will spin about 5 times without water first to detect the amount of laundry.
Then the water Height and Detergent amount will be indicated on the panel
with the water supply to the tub.
• You may change the setting after the detection of laundry quantity.
• Close the door for your safety during auto detection of the laundry. (If opened, the
machine stops working with 『Door Open』 "DE" message on the panel.)
Press START/PAUSE button.
Add the appropriate quantity of Detergent as indicated by the Water level,
and close the door.
Press START/PAUSE button.
Laundry will be started after water supply to the tub.
When the wash program ends, the buzzer will ring for 10 seconds
before the Power goes off automatically.
Please Check again!!
1
Check whether water supply hose is connected to
2
hot and cold water correctly.
Check whether the faucets are opened.
3
Check whether Power plug is firmly plugged.
4
Check whether drain hose is laid to the floor.
5
Check whether the machine is placed in level.
• Even after the manual setting for water height, it will
detect the amount of laundry for a clean wash. Thus, it is
a normal process that spins 5 times before start laundry.