Changing A Stored Number; Storing A Chain Of Numbers - GE 29484 User Manual

5. For future reference, you may want to write the name or number of the
party you have stored in this location in the corresponding space on the
memory index card.
6. Repeat steps 1-5 for any additional numbers you want to store, up to a
total of 16.
7. To cancel the storing procedure at any time, press STORE twice or place
the handset on the cradle.
NOTE: The storage procedure will automatically cancel after 15 seconds if no
keys are pressed. Also, when pulse mode is used, pressing the TONE " * '' key
before programming will store all digits in tone.
C S
HANGING A
If you want to change the stored number, simply enter the new number
over the old number using the previous memory storing procedure. To
erase a stored number, press STORE twice, then the memory location you
want to erase.
S C
TORING A HAIN OF
You can link together a dialing sequence of phone numbers in separate
memory locations by combining them in a single memory location or have
another memory location stored in one of the locations to be linked.
For example
Local access number of long distance company.
Authorization code (ID).
Where entire sequence is to be stored
including long distance phone number.
Storing
1. Press STORE.
2. Press memory location 6.
3. Press REDIAL (PAUSE).
20
N
TORED UMBER
N
UMBERS
Memory Location
6
7
8