Chapter 1 Basic Controls And Connections; Front Panel; Right Side Panel Controls; Left Side Connections - Vizio VW42L User Manual

Chapter 1 Basic
Connections

1.1 Front Panel

Power 'VIZIO' light – The VIZIO name lights white when
powered on and orange when powered off.
Remote Control Sensor – This is the window through which all
of the remote control signals pass to the sensor.
remote control directly at this window for the best response to
the remote signal.

1.2 Right Side Panel Controls

Power ( ) – Switch the VW42L on by pressing the
button once. Press the button again to the VW42L off.
Menu – This button activates the On Screen Display (OSD).
If a sub-menu is active, pressing this button will return to
the previous menu level.
Channel ▲/▼ – Use these buttons to step up or down the
TV channels. While the OSD is active, these buttons
function as up and down controls in the OSD menus.
Volume ◄/► – Use these buttons to increase or decrease
to the speaker volume. While the OSD is active, these
buttons function as left and right controls in the OSD menus.
Input (Enter) – Repeated pressing of this buttons steps
through the input sources in the following sequence: TV,
AV1 (S-Video or Video), AV2, Component 1, Component 2,
HDMI 1, HDMI 2, and RGB. Once you have stepped
through the entire sequence, you will return to the
beginning.
Additionally, when the OSD is active, this button confirms
the menu function to be adjusted. When the OSD is not
active, pressing this button will display the current input
mode.

1.3 Left Side Connections

AV1 In – Connect the primary source for composite video devices,
1.
such as a VCR or video game. Use the white and red connectors to
connect the external audio from the same source. The S-Video, if
connected, will take priority over AV1 RCA connector.
Version 6/19/2007
Controls
Point the
8
www.VIZIO.com
VIZIO VW42L HDTV10A User Manual
and