Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VX200E User Manual

Chapter 1 Basic Controls and Connections

Front Panel

1. POWER 'VIZIO' LIGHT– The
VIZIO name lights white when
powered on and orange when
powered off.
2. REMOTE CONTROL
SENSOR – This is the window
through which all of the remote
control signals pass to the
sensor. Point the remote
control directly at this window
for the best response to the
remote signal.

Side Panel Controls

POWER (
again to the HDTV off.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is active,
pressing this button will proceed to the next level.
CH + / - – Use these buttons to step up or down the TV channels. While the OSD is
active, these buttons function as up and down controls in the OSD menus.
VOL + / - – Use these buttons to increase or decrease to the speaker volume. While
the OSD is active, these buttons function as left and right controls in the OSD menus.
INPUT (ENTER) – Repeated pressing of this buttons steps
through the input sources in the following sequence: TV,
AV, Component, RGB, HDMI 1, and HDMI 2. Once you
have stepped through the entire sequence, you will return
to the beginning.
Additionally, when the OSD is active, this button confirms
the menu function to be adjusted.
Version 5/8/2009
) – Switch the HDTV on by pressing the button once. Press the button
11
www.VIZIO.com
VIZIO VX200E User Manual