Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VX37L User Manual

VIZIO VX37L HDTV User Manual

Chapter 1 Basic Controls and Connections

1.1 Front Panel

Power 'VIZIO' light – The VIZIO name lights white
when powered on and orange when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the
sensor. Point the remote control directly at this
window for the best response to the remote signal.

1.2 Side Panel Controls

Power ( ) – Switch the VX37L on by pressing the
button once. Press the button again to the VX37L off.
Menu – This button activates the On Screen Display (OSD).
If a sub-menu is active, pressing this button will return to
the previous menu level.
Channel ▲/▼ – Use these buttons to step up or down the
TV channels. While the OSD is active, these buttons
function as up and down controls in the OSD menus.
Volume ◄/► – Use these buttons to increase or decrease
to the speaker volume. While the OSD is active, these
buttons function as left and right controls in the OSD menus.
Input (Enter) – Repeated pressing of this buttons steps
through the input sources in the following sequence: TV,
AV1, AV2, Component 1, Component 2, RGB, HDMI 1 and HDMI 2. Once you
have stepped through the entire sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to
be adjusted. When the OSD is not active, pressing this button will display the current input mode.
Version 8/23/2006 9
www.VIZIOCE.com