Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls; Rear Panel Connections - Vizio VX240M User Manual

Chapter 1 Basic Controls and Connections

Front Panel

POWER 'VIZIO' LIGHT– The VIZIO name lights white
when powered on and orange when powered off.
REMOTE CONTROL SENSOR – Point the remote
control directly at this window for the best response to
the remote signal.

Side Panel Controls

POWER (
again to turn the HDTV off.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is active,
pressing this button will proceed to the next level.
CH + / - – Use these buttons to step up or down the TV channels. While the OSD is
active, these buttons function as up and down controls in the OSD menus.
VOL + / - – Use these buttons to increase or decrease the speaker volume. While the
OSD is active, these buttons function as left and right controls in the OSD menus.
INPUT (ENTER) –

Repeated pressing of this button steps through the input sources in the following sequence: TV,
AV, Component, HDMI1 and HDMI2. Once you have stepped through the entire sequence, you
will return to the beginning.

If a sub-menu is active, pressing this button will return to the previous menu level.

Additionally, when the OSD is active, this button confirms the menu function to be adjusted.
Version 5/8/2009
) – Switch the HDTV on by pressing the button once. Press the button
11
www.VIZIO.com
VIZIO VX240M User Manual