Table of Contents
Advertisement
VIZIO VP504 FHDTV10A User Manual
Chapter 1 Basic Controls and Connections
1.1 Front Panel
POWER 'VIZIO' LIGHT– The VIZIO name lights white
when powered on and orange when powered off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass to
the sensor. Point the remote control directly at this
window for the best response to the remote signal.
1.2 Side Panel Controls
POWER (
) – Switch the VP504 FHDTV10A on by pressing the button
once. Press the button again to the VP504 FHDTV10A off.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will return to the previous menu level.
CH + / - – Use these buttons to step up or down the
TV channels.
While the OSD is active, these
buttons function as up and down controls in the OSD
menus.
VOL + / - – Use these buttons to increase or
decrease to the speaker volume. While the OSD is
active, these buttons function as left and right
controls in the OSD menus.
INPUT (ENTER) – Repeated pressing of this buttons
steps through the input sources in the following
sequence: TV, AV/S-Video, Component, RGB,
HDMI 1, HDMI 2, HDMI 3 and HDMI 4. Once you
have stepped through the entire sequence, you will
return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.
Version 7/2/2008
9
www.VIZIO.com
Advertisement
Table of Contents
