Table of Contents
Advertisement
2.6 Connecting an external Receiver/Amp
1.
Turn off the power to the Plasma TV and Receiver/Amp.
2.
Using an audio cable (white and red connectors), connect the cable to the audio input
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (gray area)
audio connectors at the rear of the Plasma TV.
3.
Turn on the power to the Plasma TV and Receiver/Amp.
4.
Then press the menu button on the
remote control to open the On-Screen
Display (OSD) menu.
5.
Press the
control to select the Audio Adjust
menu.
6.
Press the
select the Audio Settings menu.
7.
Press the
select Speakers.
8.
Press the
select Off so that the sound from the
Plasma TV will now be routed through
your Receiver/Amp system.
Note:
a)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)
The audio output is not amplified and cannot be connected directly to external speakers.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio
input you can connect it to the optical DIGITAL AUDIO
OUT (gray area) at the rear of the Plasma TV. This is
active when receiving digital audio with the programs
from the DTV/TV CABLE/ANTENNA input.
Version 4/17/2007
button on the remote
button on the remote to
button on the remote to
button on the remote to
www.VIZIOCE.com
VIZIO VP50HDTV User Manual
26
Advertisement
Table of Contents
