Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VP50 HDTV20A User Manual

Chapter 1 Basic Controls and Connections

1.1 Front Panel

Power LED – Lights green when powered on, yellow
when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the
sensor. Point the remote control directly at this
window for the best response to the remote signal.

1.2 Side Panel Controls

Power ( ) – Switch the VP50 HDTV20A on by pressing the button
once. Press the button again to the VP50 HDTV20A off.
Menu – This button activates the On Screen Display (OSD). If a sub-
menu is active, pressing this button will return to the previous menu level.
Channel ▲/▼ – Use these buttons to step up or down the TV channels.
While the OSD is active, these buttons function as up and down controls
in the OSD menus.
Volume ◄/► – Use these buttons to increase or decrease to the
speaker volume. While the OSD is active, these buttons function as left
and right controls in the OSD menus.
Input (Enter) – Repeated pressing of this
buttons steps through the input sources in
the following sequence: TV, AV1, AV2,
AV3 (S-Video), Component1, Component2,
RGB, HDMI1, HDMI2 and HDMI3. Once
you have stepped through the entire
sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.
Version 12/28/2007 9
www.VIZIO.com
VIZIO VP50 HDTV20A User Manual