Chapter 3 Setting Up To Watch Television; Basic Plasma Hdtv Start Up - Vizio VP50 HDTV20A User Manual

Chapter 3 Setting Up to Watch Television

Before you start setting your TV set, please make sure that any cable, VCR, DVD, satellite or off-air
antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded
electrical outlet or surge protector.
For 'Preparing Your Plasma HDTV for Wall Mounting', see page 6.

3.1 Basic Plasma HDTV Start Up

1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the HDTV, and then plug the
power cord into an AC wall socket.
2. Connect Audio and Video Cables to the HDTV
(see pages 15 ~ 28 for detailed steps)
3. Turning Power On
Once all the components are connected, press the Power ON button on the side of the HDTV, or
press the Power ON button on the remote control.
4. Initial Setup
After powering on the TV set, the Initial
Setup screen will come up; please press
the OK key on the remote control.
a. The Language choice screen will be
displayed; the default English option
is highlighted. If you wish to change
the OSD language to Español or
Français, press the
the remote control to select the
language you want.
Press the
to go to the next screen.
Version 12/28/2007
button on
button on the remote
29
www.VIZIO.com
VIZIO VP50 HDTV20A User Manual