Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VO37L 20A User Manual

VIZIO VO37L FHDTV20A User Manual

Chapter 1 Basic Controls and Connections

Front Panel

POWER 'VIZIO' LIGHT– The VIZIO name lights white
when powered on and orange when powered off.
REMOTE CONTROL SENSOR – Point the remote
control directly at this window for the best response to
the remote signal.

Side Panel Controls

POWER ( ) – Switch your HDTV on by pressing the button
once. Press the button again to turn off.
MENU – This button activates the On Screen Display (OSD). If
a sub-menu is active, pressing this button will proceed to the
next menu level.
CH + / - – Use these buttons to step up or down the TV channels.
While the OSD is active,
these buttons function as up
and down controls in the
OSD menus.
VOL + / - – Use these
buttons to increase or
decrease to the speaker
volume. While the OSD is
active, these buttons
function as left and right
controls in the OSD menus.
INPUT (ENTER) –
Repeated pressing of this
buttons steps through the
input sources in the following sequence: TV, AV1/S-Video, AV2,
Component1, Component2, RGB, HDMI 1, HDMI 2 and HDMI 3. Once you have stepped through the
entire sequence, you will return to the beginning. If a sub-menu is active, pressing this button will return to
the previous menu level.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode
Version 3/30/2009 11
www.VIZIO.com