Gigaset E630 User Manual page 11

Gigaset E630/E630A / SUG US en / A31008-M2503-R301-1-3S43 / starting.fm / 8/29/19
¤
Turn locking disc clockwise to the end stop
The locking disc is closed once the markings on
the disc are aligned with those on the cover
Re-opening the battery cover
¤
Turn the locking disc anti-clockwise to the end
stop
7
¤
Place your fingernail in the notch on the side
between the cover and the casing
¤
Remove the cover
Charging the batteries
¤
Charge the batteries fully prior to first use in the
charging cradle.
The batteries are fully charged when the power icon
disappears from the display.
Batteries may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤
Press the centre of the control key
¤
Press the keys
language settings display appears, the set language
(e. g. English) is highlighted (
¤
To select a different language:
the desired language is highlighted on the display,
e. g. Francais
the display to activate the language.
¤
To revert to idle status:
Registering a handset
A handset can be registered to up to four base stations. The registration process depends on the
base station.
Registration must be initiated on the base station and on the handset.
Both must be carried out within 60 secs.
en fr es
(approx. 20°) and remove
.
10
and slowly and successively . . . the
press the key on the right directly underneath
Press and hold the End call key
.
5
.
6
8
.
8
.
9
.
= selected).
Press the control key
5
10
7
7.5 h
Example
Deutsch
English
until
Francais
Handset
6
9
9