Table of Contents
Advertisement
136 Driver assist systems ›
›
Engage the 1st gear.
›
Depress the accelerator pedal.
›
Release the clutch pedal.
Control is interrupted when the brake pedal is de-
pressed.
Automatic stopping and starting with automatic
transmission
A vehicle with an automatic transmission can be de-
celerated to a stop using the ACC and start moving
again. Control is disconnected in case of longer hold-
ing periods.
To resume control:
›
Depress the accelerator pedal.
Or:
›
Set the lever to position
Control is interrupted when the brake pedal is de-
pressed.
Overtaking
If your vehicle changes to the fast lane and no vehi-
cle is detected in front, ACC accelerates up to the
set speed.
Status display in the instrument cluster display
illuminates - ACC is activated
illuminates - Control is active
When the control starts, the set speed is displayed.
illuminates - ACC controls the driving speed ac-
cording to the permissible speed
illuminates - ACC controls the driving speed ac-
cording to the road
illuminates - ACC does not decelerate suffi-
ciently
›
Depress the brake pedal.
Adaptive Cruise Control (ACC)
.
Operation
Operating with the lever
Activate ACC (control inactive)
Start or resume control/Increase speed in
steps of 1 km/h (sprung position)
Stop control (sprung position)
Deactivate ACC
Increase speed in steps of 10 km/h
Reduce speed in steps of 10 km/h
Set distance level
Start control/Reduce speed in steps of 1
km/h
Starting control with the current speed
›
.
Or:
›
If no speed is saved, move the lever to the sprung
position
.
Set distance level
›
Move the
switch to the sprung position
or .
For temporary acceleration
›
Depress the accelerator pedal.
The vehicle accelerates and control is temporarily in-
terrupted. Upon releasing the accelerator, control is
resumed.
Line
, appears on the
A
display, indicating the
change in distance.
›
Use the
switch
to set the desired dis-
tance level.
Advertisement
Table of Contents
