Advertisement
5. Select a heat setting by touching or sliding the
setting selector with your finger.
• The setting will appear in the display of the
selected cooking zone.
• If you don't choose a heat setting within 20
seconds, the cooktop will automatically turn off.
Start with step 1 again.
This means that:
• you have not placed a pan on the correct cooking
zone or
• the pan you're using is not suitable for induction
cooking or
• the pan is too small or not properly centred on the
cooking zone.
• No heating takes place unless there is a suitable pan
on the cooking zone.
• The cooktop will automatically turn off after 10
minutes if no suitable pan is placed on it.
To turn off an individual cooking zone, but continue to use other cooking zones
https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Four_Burners/CI904CTB1/User_Guide_CI904CTB1/04_Usi...
If a display flashes
alternately with the heat setting
When you have finished cooking
to adjust.
• Adjust the heat setting by touching or sliding the
setting selector with your finger.
• The new heat setting will appear in the display of
the selected cooking zone.
Updated: Sun, 16 Aug 2020 01:40:18 GMT
Powered by
5
Advertisement
