Improving Fm Stereo Sound; Saving Station Presets; Listening To Station Presets; Listening To Other Components - Pioneer XV-HTD510 Operating Instructions Manual

• Manual tuning S
'Ibchaugetheffequeucy onestepat
a time,
press the
44 / I_1_ buttons. Whenyou locate a station signal,
the "_l_(tuued)indicator lights in the display.
• High-speed tuning
Press and hold the _1 or _ button forhigh speed
6
tuning, releasing the button once you reach the
frequenWyou want. When you stop on a station signal,
the "_°(tuued) indicator lights in the display.
Improving FM stereo sound
If you're listening to a stereoFNIbroadcast, but find that
there is a lot of noise becauseof a weak signal, tU
switching to mono.
Press MONO (SHIFT & S) to switch
between mono and stereo.
Wheu listening in mono, the 0 indicator lights iu tile
display.
2
Saving station presets
If you ofleu listen to a particular radio station, it's
convenieut to have the receiverstore the frequeucyfor
easy recall wheneveryou walt to listen to tha station.
This savesthe effort of manually tuning in each time.
This system cm_save up to 30 station presets.When
saving FMfrequencies, the receiveralso savesthe mono
setting (seeImpr'oviH,_ FM stereo sound above).
Tune to a station you want to memorize.
8oeListe*zDzg to the radio on page 21 for mote on how
to do this.
Press SYSTEM SETUR
Press 41 or I_ until you see ST. MEMORY
appear in the display.
Press ENTER.
Press 41 or I_ to select a station preset
number.
Mternatively,use the number buttons (use the >10
button for llumbers over 10).
Ifyou use the number buttons, you cm_skip step6.
Press ENTER again to save the station
preset.
Repeatthese steps to save up to 30 station presets
Listening to station presets
lIaving saved up to 30 station presets,you ca_ be
listening to a station with a couple of button presses.
Press TUNER/BAND to switch to the
tuner.
Ifyou're using the front panel controls,pressTUNER/
BANDrepeatedlyto selectthe preset stati0u mode.
Use
I_1_1or I_1 to select the station
preset you want to listen to.
Mternatively,use tile uumber buttous (use the >10
button for lmmbet_ over10)
• If the systenl is left discolmectedfrom the ACpower
outlet for a lengthy period, the staiou presetswill be lost
and will have to be repmgr_mmd.
Listening to other components
Youmay have conuected your '1_ _ , V CR,or other
components to play through this system.Usethe TV/
AUXbuttou to selectyour external equipnmnt as the
source.
Press TV/AUX.
Pressrepeatedlyto switchbetween:
• "IVinputs
• DIGITAL input
• AUX analog inputs
2 Start playing the source component.