Protective Foil - Miele PUR 98 D Operating And Installation Instructions

Protective foil

The housing components have
protective foil around them to prevent
them from transport damage.
 Please remove this foil before fitting
the housing components. It can be
peeled off easily.
 Draw two intersecting lines on the
ceiling.
 With air extraction mode:
- Place a section of the exhaust
ducting in the ceiling and feed it
down through the cross-sectional
area as illustrated. Exhaust ducting of
approx. 700 mm in length is required
between the ceiling and the
rangehood exhaust socket.
- Secure the exhaust ducting to the
exhaust socket, e.g. with a hose clip
(available as an optional accessory)
on flexible ducting.
 Place the mains cable in the ceiling
and guide it through the ceiling in the
area shown. A mains cable of approx.
700 mm in length is required between
the ceiling and the rangehood
connectors.
Installation
29