Miele PUR 98 D Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Ventilation Hood
  5. PUR 98 D
  6. Operating and installation instructions
Miele PUR 98 D Operating And Installation Instructions

Miele PUR 98 D Operating And Installation Instructions

Ventilation system
Hide thumbs Also See for PUR 98 D:
Table of Contents

Advertisement

Quick Links

Operating and Installation Instructions
Ventilation System
To prevent accidents and damage to the appliance, you must read
these instructions before installing the appliance and using it for the first
time.
en-US
M.-Nr. 10 770 050

Advertisement

Table of Contents
loading

Related Manuals for Miele PUR 98 D

Summary of Contents for Miele PUR 98 D

  • Page 1 Operating and Installation Instructions Ventilation System To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr. 10 770 050...

  • Page 2: Table Of Contents

    Contents IMPORTANT SAFETY INSTRUCTIONS .............. 3 Caring for the environment ................ 10 Description of functions .................. 11 Guide to the appliance .................. 12 Operation...................... 14 Turning on the blower.................... 14 Selecting the power level ..................14 Delayed shut-off ....................14 Turning off the blower....................

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep these operating instructions in a safe place and pass them on to any future user.
  • Page 4  Unauthorized installation, maintenance, and repairs can cause considerable danger for the user. Installation, maintenance, and repairs must only be carried out by a Miele authorized technician.  A damaged ventilation hood can be dangerous. Always check for visible signs of damage. Never use a damaged ventilation hood.
  • Page 5  Defective components should be replaced by Miele original parts only. Only with these parts can safety of the appliance be assured as intended by the manufacturer.
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS  During installation, maintenance, and repair work, the ventilation hood must be disconnected from the electrical supply. It is only completely isolated from the electricity supply if one of the following applies: – The circuit breakers on the electrical service panel are tripped. –...
  • Page 7 IMPORTANT SAFETY INSTRUCTIONS – b) NEVER PICK UP A FLAMING PAN - You may be burned. – c) DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result. – d) Use a fire extinguisher ONLY if: –...
  • Page 8 IMPORTANT SAFETY INSTRUCTIONS  There is a risk of fire if cleaning is not completed according to the instructions in this manual.  Please note that the heat rising from the stovetop during cooking can cause the ventilation hood to become very hot. Do not touch the housing or the grease filters until the ventilation hood has cooled down.
  • Page 9 Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a short circuit. Accessories  Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty will become void.

  • Page 10: Caring For The Environment

    Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.

  • Page 11: Description Of Functions

    Description of functions The following functions are available on Recirculation mode your ventilation hood, depending on the The recirculation mode requires a model: recirculation kit and OdorFree Charcoal Filter (available as optional accessories, Extraction mode see “Technical Data” for more information) The air is drawn in and cleaned by the grease filters and directed outside.

  • Page 12: Guide To The Appliance

    Guide to the appliance...
  • Page 13 Guide to the appliance a Telescopic chimney b Chimney c Canopy d Control panel e Grease filter f Spacer frame The spacer frame creates a shadow gap between the chimney and the ceiling. The ventilation hood can be installed with or without the spacer frame. g Recirculation vent (only for recirculation mode) h Cooktop lighting...

  • Page 14: Operation

    Operation Turning on the blower Turning off the blower  Press the On/Off control  to turn Switch the blower on as soon as you start cooking. This is to ensure that the blower off. vapors are captured right from the start. The ...

  • Page 15: Turning Power Management On/Off

    Operation Turning power management on/off Safety shut-off You can deactivate power If power management has been management. deactivated, the ventilation hood will Keep in mind that this may increase switch itself off automatically after energy consumption. 12 hours if it has been left on (blower and overhead lighting).

  • Page 16: Energy-Saving Tips

    Energy-saving tips This hood operates in a very efficient and energy-saving manner. The following will help you to save even more energy when using it: – Ensure that there is sufficient ventilation in the kitchen when cooking. If there is insufficient air flow during extraction mode, the hood cannot operate efficiently, causing increased operating noise levels.

  • Page 17: Service And Warranty

    Miele This service is available in USA only. dealer or Miele Technical Service. The telephone number for Miele is listed MieleCare, our Extended Service at the back of these instructions. Contract program, gives you the...

  • Page 18: Cleaning And Care

     Stainless steel surfaces can also be cleaned using a non-abrasive  Before cleaning or servicing the stainless steel cleaner, available from hood, disconnect it from the power Miele. supply, see “IMPORTANT SAFETY INSTRUCTIONS”.  To prevent the surfaces from quickly becoming dirty again, we recommend...

  • Page 19: Grease Filters

    Cleaning and care Grease filters  Risk of fire! Oversaturated grease filters are a fire hazard. Clean the grease filters at regular intervals. The reusable metal grease filters in the appliance remove the solid particles contained in kitchen vapors (grease, ...

  • Page 20: Odorfree Charcoal Filter

    Cleaning and care  In a Miele dishwasher use the OdorFree Charcoal Filter “Normal” program. If the hood is equipped for recirculation, an OdorFree Charcoal Filter must be Depending on the detergent used, installed in addition to the grease filters.

  • Page 21: Disposing Of Charcoal Filters

    Cleaning and care When to change the OdorFree Charcoal Filter  Replace the charcoal filter when it no longer absorbs kitchen odors effectively. It should be replaced at least every 6 months. Disposing of charcoal filters  The used charcoal filter can be disposed of with the normal household waste.

  • Page 22: Changing A Light Bulb

    (see “IMPORTANT Bulb type ......LED, GU10 SAFETY INSTRUCTIONS”). Power ..........3W Light bulbs are available from Miele or specialist dealers.  Insert the lever supplied into the gap between the bulb and the bulb holder..

  • Page 23: Installation

    Installation Before installation  Before installing the appliance, 4 M4 x 8.5 mm screws read all of the information contained for securing the telescopic extension in this chapter and also in the piece holders. “IMPORTANT SAFETY INSTRUCTIONS” section. Information is subject to change. Please 14 M4 x 8 mm screws refer to our website to obtain the most for securing the spacer frame and...

  • Page 24: Appliance Dimensions

    Installation Appliance dimensions a Mounting area for the exhaust ducting and power cable. In recirculation mode, only the power cord is required. b Possible height range for appliance in vented mode c Possible height range for appliance in recirculation mode d Alternative installation with spacer frame e Air vent positioned at the top for recirculation...

  • Page 25: Distance Between Cooktop And Ventilation Hood (S)

    Please also observe the information contained in the “IMPORTANT SAFETY INSTRUCTIONS” section. Minimum distance S Cooking appliance Miele Non-Miele appliance appliance Electric Cooktops 24" (610 mm) Electric Barbeques and Fryers 26"...

  • Page 26: Installation Recommendations

    Installation Installation recommendations Structural support – A distance of at least 26" (660 mm) is recommended above electric cooktops to provide more workspace and easier cooking under the hood. – When selecting an installation height, always take the user height into consideration.
  • Page 27 Installation  For vented mode: – Place a section of the exhaust ducting in the ceiling and feed it down through the cross-sectional area as illustrated. Exhaust ducting of approx. 27 ⁹/₁₆" (700 mm) length is required between the ceiling and the ...
  • Page 28 Installation  Use a knife to release the four spacers and the two covers from the spacer frame supplied.  Drill four holes  ³/₈“ (10 mm), approx. 4 ¹/₂” (115 mm) deep for the plugs supplied.  Use the spacer frame as a drilling ...
  • Page 29 Installation The spacer frame can be installed between the chimney and the ceiling. This creates a shadow which gives the illusion of a gap between the ceiling and the chimney. This is useful if the ceiling  Mount the spacer frame onto the is not level or is uneven.
  • Page 30 Installation  Hang the installation frame on the  Align the installation frame and four screws. The front of the frame is secure it with the screws. marked with a “V”. The spacers, which were removed  If using the spacer frame, place the from the spacer frame at the start, two covers into the fixing holes.
  • Page 31 Installation  Holding the installation frame securely, remove the two fixing screws and extend the installation frame to its maximum length.  Replace the screws. The directional unit from recirculation kit DUI 32 (optional accessory) is installed for recirculation mode (RM): ...
  • Page 32 Installation  Secure the exhaust socket to the hose using a hose clip.  Secure the hose to the directional unit socket using a hose clip.  Check that the hose is held securely.  Push the telescopic chimney over the installation frame: –...
  • Page 33 Installation  Fit the four telescopic chimney  Bend back the two retaining tabs. clamps. When the screws are  Push the chimney over the telescopic tightened, the clamps spread out and extension piece and bend the push the telescopic expansion piece retaining tabs outward again to upwards.
  • Page 34 Installation A non-return flap is supplied with the hood or is already fitted in the exhaust socket of the motor unit (depending on model).  With vented mode (AE) insert the non-return flap in the exhaust socket if your ducting system is not equipped with one.
  • Page 35 Installation  Connect the power cord. See “Electrical connection.”  Unscrew both screws from the installation frame again.  Place the exhaust ducting onto the The canopy can now be adjusted to the exhaust socket. desired height, observing the permissible height ranges: –...
  • Page 36 Installation  Raise the canopy to the desired  Hold the chimney securely, bend height and secure it with the screws. back the retaining tabs and carefully lower it. The chimney will locate in the cut-out in the canopy.
  • Page 37 Installation  With recirculation mode (RM) ventilation hoods, insert the OdorFree Charcoal Filter.  Remove the grease filters from the hood.  Insert the safety screw on the inside.  Carefully remove the protective foil from the grease filters.  Reinsert the grease filters.

  • Page 38: Air Venting

    Air venting – Make sure that all connections are WARNING: Danger of toxic fumes. secure and airtight. Gas cooking appliances release carbon monoxide that can be Remember that any constriction of harmful or fatal if inhaled. the airflow will reduce extraction To reduce the risk of fire and to performance and increase operating properly exhaust air, the exhaust...

  • Page 39: Condensate Trap

    Air venting Condensate trap Reducing Collar (optional accessory) If you would like to reduce the In addition to insulating the exhaust environmental impact of your ventilation duct, we recommend installing a system by limiting the CFM output the condensate trap to collect and Reducing Collar can be installed.

  • Page 40: Electrical Connection

    If there is any question concerning AWG and 16 AWG. the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. WARNING: THIS APPLIANCE MUST BE GROUNDED The strain relief must be used to ensure...

  • Page 41: Technical Data

    Technical data Blower motor 350 W Overhead lighting 4 x 3 W Total connected load 362 W Supply voltage, frequency 120 V AC, 60 Hz Fuse 15 A Weight 74.8 lbs (34 kg) Optional accessories for recirculation mode DUI 32 conversion kit to change from vented mode to recirculation mode and DKF 12-900 OdorFree Charcoal Filter.
  • Page 43 Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...
  • Page 44 PUR 98 D en-US M.-Nr. 10 770 050 / 03...

Table of Contents