Table of Contents
Advertisement
3.
Push the OK joystick button to the Right to select the SETUP mode menu.
4.
Push the OK joystick button Up or Down to select and highlight the Format option.
5.
Push the OK joystick button to the Right to open the Format submenu.
Push the OK joystick button Up or Down to select either "YES" to format the card
6.
or "No" to exit without formatting and then press the OK button.
Powering on and Menu Function Control
Important: Do not plug your camera into the computer until the software
installation is complete. See the Install the Vivitar Experience Image
Manager Software section for more details.
Power on
To power on the camera, flip open the LCD Screen. The camera automatically powers
on. The LCD monitor will light up indicating that your DVR is ready for use.
Once the camera goes into power savings mode, press the Power button to turn on
your DVR.
Power off
Closing the LCD Panel will automatically power-off your camera.
17
Advertisement
Table of Contents
