Powering On And Setting Dvr Function Control - Vivitar DVR 850W User Manual

• Opening the cover of the Camcorder may cause electrical shock and will void
your warranty.
• Use only the recommended power accessories. Use of power sources not
expressly recommended for this equipment may lead to overheating, distortion
of the equipment, fire, electrical shock or other hazards

Powering on and setting DVR Function Control

To power on the camcorder, flip open the LCD Screen. The camcorder
automatically powers on. The Power button is situated on the inside of the
camcorder facing the LCD screen.
Power on
Press the Power button to turn on your DVR.
The LCD monitor and a blue LED next to the DC/DV shutter button, will light up
indicating that your DVR is ready for use.
Power off
Press the Power button to turn your DVR camcorder off. The DVR
camcorder will switch off. If you close the LCD screen, this will also turn the
DVR camcorder off.
By default if the DVR camcorder is not in use or in an operational mode for 3
minutes (180 seconds) it will automatically switch off.
When there is insufficient battery power, a red battery icon will appear on the
LCD screen. The camcorder will automatically power off a few moments later
Setting the Language
When using the video camcorder for the first time after purchasing it, be sure to
choose a language and set the date & time before use.
1. Turn the Power on to enter the DV mode.
2. Press the OK/Menu button.
10
.
.