Preparing to Take Pictures
Power Save Settings
You may perform power save setting in any Mode dial.
(
Note: The default setting is "Off".
1. Press Menu button.
2. Then press RIGHT button to SETUP MENU (
3. Press DOWN button (
4. Press SET button to POWER SAVE menu.
5. Press UP/DOWN button for your new setting.
6. After your selection, press SET again to complete your setting.
1 minute: This camera will automatically turn off monitor screen if there is
no operation after one minute (the LED is on in Green.) Per-
forming any button will have the monitor screen to turn back on.
)
) to POWER SAVE.
12
).