Troubleshooting - Vivitar ViviCam 3345 Owner's Manual

If any problems arise with the ViviCam 3345, refer to this troubleshooting chart:
Symptom
The camera doesn't turn on.
The camera won't capture a
image.
I can't download images to the
PC.
I get a blurred image when
downloading my images to my
computer.
Possible cause
The battery is drained.
Power button must be pressed
for 3 to four seconds
Is the camera turned on?
Is the camera connected to a
computer?
The light condition is
insufficient.
The camera is processing.
Connection may have failed.
There may be a momentary
delay between pressing the
shutter button and the actual
exposure.
Change or recharge the battery. Also,
check for correct polarity (orientation) of
the batteries.
Press and hold the Power button until
"ON" appears in the status display
The camera powers off automatically after
60 seconds. Make sure the camera's
power is ON before taking an image.
The camera's buttons are not functional
when connected to a PC. Disconnect the
camera to capture more images.
Turn the flash mode to Flash ON.
Wait for the camera to store files. The
image number blinks at status LCD while
the camera is processing and stops
blinking when the camera is ready for use.
Check to ensure that all connections are
secure. Look for Removable Disk under
My Computer.
Hold your ViviCam 3345 steady until you
hear a "beep" which indicates the
exposure is completed.
18

TROUBLESHOOTING

Solution