Delivery Scope; Intended Use; Technical Data; Mounting And Operation - Bosch Professional GBH 2000 RE Manual

OBJ_BUCH-2542-002.book Page 16 Tuesday, September 13, 2016 2:29 PM
16 | English
Symbol Meaning
Drilling without impact
Hammer Drilling
Chiselling
Screwdriving
Right/left rotation
Vario-Lock
Switching On
Switching Off
On/Off switch lock-on
Releasing the On/Off switch
Low speed/impact rate
High speed/impact rate
Extraction
Tool holder
P Rated power input
1
E Impact energy per stroke according to
EPTA-Procedure 05/2009

Mounting and Operation

The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action
Inserting SDS-plus Drilling Tools
1 609 92A 2FD | (13.9.16)
Symbol Meaning
n No-load speed
0
Ø max. Drilling diameter, max.
Concrete
Steel
Wood
Brickwork
Core bit
Weight according to EPTA-Procedure
01:2014
Protection class

Delivery Scope

Rotary hammer, auxiliary handle and depth stop.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.

Intended Use

The machine is intended for hammer drilling in concrete,
bricks and masonry. It is also suitable for drilling without im-
pact in wood, metal, ceramics and plastic, as well as for
screwdriving.
GBH 2000 DRE: The machine is also suitable for light chisel-
ling work.

Technical Data

The technical data of the machine are listed in the table on
page 6.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.
Figure Please observe
1
Page
7
Bosch Power Tools