Motorola ASTRO 25 GTR 8000 Manual page 145

AuthPriv
Both Authentication Passphrase and Encryption Passphrase are needed for communicating
with the device.
The User Status field reflects the current operational status of the selected SNMPv3 User. The
Status Types include:
Active
User configured on the device; the Update and Delete options are enabled.
Not in service
User configured on the device; the Update and Delete options are enabled.
Not ready
User configured on the device; the Update and Delete options are enabled.
Not present
Not present on the device; the Create option is enabled.
The security level of the selected user is set.
8 To change the Authentication Passphrase for the selected SNMPv3 user, if applicable to the
selected security level, perform the following actions:
a From the Authentication Passphrase section, enter the passphrase into the Old
Passphrase field.
NOTICE: If you do not know the passphrase, select the I do not remember old
passphrase check box.
b Enter the new passphrase into the New Passphrase field.
NOTICE: The passphrase must be between 8 and 64 characters in length and consist
of upper or lowercase alphanumeric characters (excluding the @ # $ ^ or _
characters).
c Enter the same new passphrase into the Confirm New Passphrase field.
9 To change the encryption passphrase for the selected SNMPv3 user, if applicable to the
selected security level, perform the following actions:
a From the Encryption Passphrase section, enter the old passphrase into the Old
Passphrase field.
NOTICE: If you do not know the passphrase, select the I do not remember old
passphrase check box.
b Enter the new passphrase into the New Passphrase field.
c Enter the same new passphrase into the Confirm New Passphrase field.
10 To change the Authoritative Engine Identifier, applicable to MotoInformA and MotorInformB
users only, perform the following actions:
a From the Authoritative Engine ID section, select the desired current engine ID from the
Current Engine ID drop-down list.
b In the New Engine ID field, enter the new engine ID.
NOTICE: The new engine ID must be between 1 and 27 characters and comply with
the Engine ID Domain Name Syntax.
11 To create, update, or delete SNMPv3 users, go to
on page
146.
Chapter 4: GTR 8000 Base Radio Configuration
Adding or Modifying an SNMPv3 User in CSS
MN003286A01-E
145