Handling The Rack After Installation; Cage Nut Insertion And Removal Procedures - Fujitsu 1740 User Manual

4

Handling the Rack after Installation

This section explains how to handle the rack after installation.
4.1

Cage nut Insertion and Removal Procedures

'
4.1.1 Insertion
1
Install the cage nut from the inside of the rack. Insert one edge of the cage
nut into the cage nut hole of the rack.
The following figure shows the case where the edge of the cage nut is inserted into the lower
hole.
'
2
From the outside of the rack, insert the tip of the cage nut tool into the hole
that has the installed cage nut, and snap the other edge of the cage nut into
the hole.
'
Direction of edge of the cage
nut tool
Cage nut tool
4 Handling the Rack after Installation
E
93