Checking The Drive Belt; Installing The Drive Belt And Drive Pulley - Yamaha TMAX 2020 Service Manual

EAS30236

CHECKING THE DRIVE BELT

1. Check:
• Drive belt
Refer to "CHECKING THE DRIVE BELT" on
page 3-20.
ECA26680
NOTICE
• To protect the drive belt from damage, han-
dle it with care.
• The drive belt can not be bent smaller than
90 mm (3.54 in) "a".
• The removed drive belt can not be twisted
inside out.
2. Check:
• Drive pulley
• Rear wheel pulley
Bent teeth  Replace the drive belt and pul-
leys as a set.
3. Check:
• Holder
Cracks/damage  Replace.
EAS31586
INSTALLING THE DRIVE BELT AND DRIVE
PULLEY
1. Install:
• Drive belt
ECA22720
NOTICE
Align the mark of the drive belt with the prog-
ress direction "A".
Do not twist the drive belt when installing it.
BC3 - 46 2 41 - 01 DO NOT BEND
A
BC3 - 46 2 41 - 01 DO NOT BEND
2. Lubricate:
• Drive pulley assembly inner part
Refer to "LUBRICATING THE DRIVE PUL-
LEY AND DRIVE AXLE" on page 3-22.
3. Install:
• Drive pulley assembly
• Drive pulley assembly bolt
4. Tighten:
• Drive pulley assembly bolt
TIP
Tighten the drive pulley assembly bolts in the fol-
lowing order, bolt "1", bolts "2", and bolts "3".
Drive pulley assembly bolt
48 N·m (4.8 kgf·m, 35 lb·ft)
2
5. Adjust:
• Drive belt tension
Refer to "DRIVE BELT TENSION" on page 3-
21.
4-95
BELT DRIVE
2
1
3