Visioneer OneTouch 9650 User Manual page 98

Your scanner has a built-in power saving feature that is set to power
down after 15 minutes of idle time. You can change the time before
the scanner powers down, from 1 minute to a maximum of 10
hours.
3. Click the arrows for the Lamp timeout setting and choose a time.
To turn the lamp on and off manually without turning off power to
the scanner, click the Lamp On or Lamp Off buttons.
To return the scanner to its factory settings, click Reset Device.
4. Click OK to save the changes and close the dialog box.
C O T
ONFIGURING THE NE
B 91
OUCH UTTONS