Visioneer OneTouch 9420 User Manual page 86

82 V O
ISIONEER NE
T 9420 USB S
OUCH CANNER
2. Click the Properties button.
Your scanner has a built-in power saving feature that is set to power
down after a period of idle time. You can set the power save mode
from 10 minutes to a maximum of 10 hours.
3. Click the arrows for the Enable power save mode setting to choose
a time setting.
To turn the lamp on and off manually without turning off power to
the scanner, click the Lamp On or Lamp Off buttons. To manually
turn on the Transparency Adapter lamp, click TA Lamp On. To
turn off the TA Lamp, choose Scan Reflective Using on the
PaperPort Advanced Interface.
To return the scanner to its factory settings, click Reset Device.
4. Click OK to save the changes and close the dialog box.
U ' G
SER S UIDE