About The Onetouch Properties Window - Visioneer OneTouch 9420 User Manual

48 V O
ISIONEER NE
Click the tab that
corresponds to the
scanner button you
want to configure.
Select the destination
application that will
open when you are
finished scanning. You
use the destination
application to view
and work with your
scanned images.
T 9420 USB S
OUCH CANNER
A O T
BOUT THE NE OUCH
The OneTouch Properties window is where you can select new settings
for the buttons. The tabs across the top of the window correspond to
the buttons on the scanner.
Note: Some of the options on the OneTouch Properties Window
(and other OneTouch windows and dialog boxes) are "grayed out"
and are not available. Grayed out options are not appropriate for your
Visioneer 9420 scanner. If you use the OneTouch application with
other Visioneer scanners, grayed out options become active, if
appropriate.
The following example of the OneTouch window shows the settings for
Scan Button. The button is set to scan with the scan configuration
named Color Photo and then open ScanSoft PaperPort to display the
scanned image. The format option is set to scan in the JPG image
format.
U ' G
SER S UIDE
P W
ROPERTIES INDOW
Click this
tab to select
options.
Select the file
format for
your scanned
images.
Select a
configuration
for scanning
the item.