Visioneer OneTouch 9420 User Manual page 37

2. To scan a 35mm slide, first position the 35mm mask on the glass.
The mask has one square corner. Align that corner with the arrow
on the scanner body.
Make sure that the text on the 35mm mask faces up so the slide fits
properly in the mask.
Follow the directions on the mask and place the 35mm slide
horizontally into the slide holder.
Calibration slot
Notice that the mask has a narrow slot next to the slide holder.
That slot is for calibration to assure that you get the best possible
scan results. Do not place items in the calibration slot.
3. To scan a negative, first slide the filmstrip into the 35mm negative
mask and center the frame you want to scan in the opening.
Then position that mask on the glass and align its square corner
with the arrow on the scanner body. Make sure the text on the
mask faces up.
S P
CANNING FROM THE APER
P S 33
ORT OFTWARE