Installing The Plenum On The Rack When Router Is Not Installed On The Rack - Cisco NCS 560-4 Hardware Installation Manual

Installing the Cisco NCS 560-4 Router
Figure 17: Dimensions of the Assembled Plenum

Installing the Plenum on the Rack When Router is Not Installed on the Rack

This procedure talks about installing the plenum when the router is not installed on the rack.
Procedure
Step 1 Identify the correct brackets to the plenum.
Step 2
Depending on the rack on which you are installing the plenum, identify the appropriate screws to the plenum
as shown in the figures below.
Installing the Plenum on the Rack When Router is Not Installed on the Rack
Cisco NCS 560-4 Router Hardware Installation Guide
45