Table of Contents
Advertisement
4 Use the control pad to move the cursor to the next point, or the rim of the circle.
5 Press [SELECT] > Add Point / Set Radius to confirm the position.
6 For Line or Area, continue to add points until the boundary is complete.
7 Use the main knob, select Done to create the boundary.
Reviewing a Boundary
Use the control pad to highlight a boundary on the left, and select Review:
• Select Display Options to change how the boundary is displayed.
• Select Edit Boundary to edit or delete the boundary.
• Select Alarm and press [SELECT] to toggle the boundary alarm on/off.
Showing/Hiding Boundaries
• Select Show All to display all boundaries in the Navigation Chart mode.
• Select Hide All to hide all boundaries from the Navigation Chart mode.
3�5
Sonar Appearance
Press [MENU] > Appearance in sonar modes to customize the appearance of your sonar
display.
NOTE: The menu is specific to Traditional, Split Frequency, ClearVü, and SideVü modes.
3.5.1
Changing the Colors
You can change how sonar returns are displayed on the sonar screen.
• Select Color Scheme and select one of the color schemes.
• Select Color Gain and use the main knob or the control pad to adjust the intensity of
colors shown on the screen (only available in Traditional and Split Frequency modes).
TIP: Select a higher value to differentiate targets higher in the water column. Select a
lower value when targets are near the bottom.
3.5.2
Selecting On-Screen Data
You can show or hide individual data on the screen.
• Select Overlay Data > Depth to show/hide the water depth.
• Select Overlay Data > Water Temperature to show/hide the water temperature.
• Select Overlay Data > Unit Voltage to show/hide the voltage.
• Select Overlay Data > Speed and select whether to hide the speed, show the speed
over ground, show the speed over water, or automatically select which speed to show.
• Select Overlay Data > Time of Day to show/hide the time.
• Select Overlay Data > Beam Coverage to show/hide the beam coverage.
50
Menu
Appearance
Color Scheme
Sonar Setup
Clutter
Color Gain
Overlay Data
Alarms
Navigation Info
Depth Line
Appearance
A-Scope
Settings
f
G
t
System
Preferences
Whiteline
Communications
Fish Symbols
My Vessel
Display
Peak Hold
CHAPTER 3 MENU AND SETTINGS
Classic Blue
Default
>
Variable
Off
Off
Advertisement
Table of Contents
