Table of Contents
Advertisement
1, Power supply to be checked before using to ensure use of the power is
in accordance with
equipped with a good grounding line for safety.
2, Installation of accessory: Use the
until the lowest point, and fit
3, Installation of bucket: Use the
until the lowest point, fit the
4, Transmission Shift: Stop the mixer from running before speed change，
and adjust the
12 Gear change handle
the
12 Gear change handle
off the mixer and rotate the
5, Remove the accessory: Use the
until the lowest point, and pull the
hand and remove
6, Start operation: After installation of the
the material for stirring into the
fixed
position
counterclockwise), meanwhile close the
speed level by turning the
to start running.
Start button
7, Safety protection: This mixer is designed with
switch. When operator faces special safety problem,
14 Overload
Emergency stop
Overload switch
protection of motor when overheat and overload occurs. Under this
circumstance, you just need to reduce the load to a normal level and
press the
14. Overload switch
8, Timing: For convenience, our mixers are equipped with timer with the
time range of 0-30 minutes. You can set the timer to by turning
to required minute point and press
Timer
The mixer will stop working automatically when time is up. If you do
8
13 Parameter
21 Lifting handle
8 Mixer
21 Lifting handle
2 Barrel
can not fit properly in position, please turn
3 Stirring shaft
21 Lifting handle
with the other hand.
8 Mixer
2 Barrel
by
21
Lifting
12 Gear change handle
can be pressed for immediate power cut off.
allows the mixer to shut off automatically for the
for resumption.
Power outlet must be
badge.
to lower the bucket
into
3 Stirring shaft
to lower the bucket
in, and fixate with
to the desired speed location. If
for assistance.
to lower the bucket
9. Handle for fixate mixer
and the
2 Barrel
and then lift the
,
(Turn
handle
11 Safety grid
and press the
15 Emergency stop
23 Start Button
7 Press board
with one
Mixer, put
8.
to a
2 Barrel
190
degrees
Choose the
.
23.
and
15
The
14
22
for activation.
Hide quick links:
Advertisement
Table of Contents
