Safety Attentions - Doyon EM Series User Manual

V. Safety Attentions
The power parameter please see nameplate. If the voltage
range of the power supply is too wide, it may cause the
mixer unable to start and the motor burnt.
automatic voltage regulator with big capacity must be
installed for support.
Do not release the plug by pulling the wire. Please release
the plug by holding it firmly. Keep the wire free from any
extrusion condition. Machine needs to be unplugged
before installation or moving.
While mixer is running, attempting to put hand(s) or
finger(s) into the bucket is strictly prohibited in order to
avoid injury.
4
Separate outlet to be used with the guarantee by
correct grounding.
In this case, The EM mixers offer a power cord with three-wire
(grounded) plug, which is in accordance with the
standard of three-wire (grounded) outlet. Do not cut
or remove the power cord plug (grounded) in any
case. The plug is able to touch the ground when the
mixer is installed properly. Warning! The plug
should be kept firmly in the socket, otherwise may
cause fire.
Do not use when wire damaged. The damaged wire
must be replaced in professional repairs.
Turn off the power before accessory change to
avoid injury.
.