Tools & Parts - Whirlpool CAM2752 Installation Instructions Manual

TOOLS & PARTS
Tools Needed:
8" (200 ram)
or 10" (250 ram)
pipe wrench
Torx _'*1"-20 security
screwdriver or bit
level
8" (200 ram) or 10" (250 mm)
adjustable wrench
that opens to 1" (25 mm}
flat-blade screwdriver
phillips screwdriver
1" (25 mm) hex-head
socket wrench
:L/4" socket wrench
pliers (that open to
19/i_ '' [39 mm]}
utility knife i/4" (6 mm) nut driver 27" (686 mm)
wood block
caulk gun and caulk vent clamps pipe-joint compound putty knife
(for installing new exhaust vent) suitable for gas type
flashlight (optional) i" (25 ram)
open-end wrenches
ruler or measuring tape
Parts Supplied:
foot boots (4)
leveling legs (4)
t <_ TORXis a registered trademark of Saturn Fasteners, Inc.
5