Questions And Answers - Gigabyte I1320 Manual

Hide thumbs Also See for I1320:
Table of Contents

Advertisement

What is the capacity of SDHC cards that Ultra Thin can support?
 The specification of SDHC that Ultra Thin SD card reader
supports shall be in accordance with that of the SD Association.
Currently, the maximum capacity announced by SD Association
is 32GB
http://www.sdcard.org/developers/tech/sdhc/
How can Ultra Thin BIOS be upgraded in the DOS and Windows
mode?
 Please refer to Notebook website "How to upgrade Ultra Thin
BIOS in the DOS and Windows mode?"

6.3 Questions And Answers

Q: I can feel a mild heat next to the battery pack. Is this normal?
A: The battery will generate heat during recharging and
discharging. There is a protection circuit inside the Notebook to
prevent overheating. User needs not worry.
Q: My battery operation time is not as long as it should be. Why?
A: The battery is heat sensitive and can only be charged to its
maximum if the battery and its environmental temperature remain
within 15-25°C (59-77°F). The more the temperature deviates
from this range during recharging, the less chance there is for the
battery to be fully charged. In order to recharge the pack to its full
capacity, users are requested to cool down the unit by unplugging
the AC Adapter. Wait until it is cooled down. Then plug in the AC
Adapter to start recharging again.
Q: I did not use my spare battery for a few days. Even though it
was fully recharged, there wasn't as much power left as a newly
charged one. Why?
A: The batteries will self-discharge when they are not being
recharged. To make sure a battery pack is fully charged, recharge
before use. Always keep the battery inside the Notebook and
have the AC adapter connected whenever possible.
Q: I did not use my spare battery for months. I have a problem with
recharging it.
A: If you happen to leave your battery pack to go through an extended
period of self-discharge, say more than three months, the battery
voltage level will become too low and needs to be Pre-Charged (to
bring the battery voltage level high enough) before it automatically
(for Li-Ion only) resumes its normal Fast Charge. Pre-Charge may
take 30 minutes. Fast Charge usually takes 2~3 hours.
ULTRA THIN SERIES USER'S MANUAL
35

Advertisement

Table of Contents
loading

Table of Contents