How To Connect Usb Devices; How To Connect Displays - Gigabyte I1320 Manual

Hide thumbs Also See for I1320:

Table of Contents

5.1

How To Connect USB Devices

Connect a USB Device

To connect a USB device simply line it up with the USB port on the

unit and press it into the port securely. It will only go in one way

because of the notching used so ensure that it is lined up correctly

and do not force the USB connector into the port if it does not want

to go in. USB Devices support Plug and Play and should auto

discover inside the units operating system and install drivers or

request drivers.

Disconnect a USB Device

To remove the device, look for the Safely Remove Hardware icon

on the taskbar and open the tool by double clicking with the left

mouse button. Select the device you would like to remove and click

on stop, and windows will then let you know that it is safe to remove

the device, and then pull the cable out of the port.

5.2

Connect an external Display

To insert the cable, simply line it up with the port on the side of the

Ultra Thin and press it into the port securely. Please note that the

port does not have screw pin holes and the connector cannot be

screwed into the Ultra Thin. Please make sure that the cable is

seated firmly and securely.

Disconnect an external Display

To remove the cable simply grab the head of the cable and gently

pull out of the Ultra Thin, ensuring that the port is no longer active

with a display output. DO NOT pull by the cable itself, this will

damage the display cable of the monitor or projector or display

device.

ULTRA THIN SERIES USER'S MANUAL

Table of Contents