Intel® Rapid Start Technology Driver - Clevo P150EM Concise User Manual

Intel Rapid Start Technology
®
Driver
Intel(R) Rapid Start Technology can resume power
from Hibernation within 5 to 6 seconds and can remember
your computer's previous state with zero power.
System Requirements to support Intel® Rapid Start Tech-
nology:
• Rapid Start Technology should be enabled in the BIOS .
• Intel Rapid Storage Technology software installed.
• A Solid State Drive (SSD) with a minimum capacity of
18.6GB.
Intel® Rapid Start Technology Configura-
tion
1. Enable/disable Intel(R) Rapid Start Technology from the
BIOS (see Intel(R) Rapid Start Technology (Advanced
Menu) on page 9).
2. Go the Windows control panel and double-click
Administrative Tools (System and Security) > Computer
Management > Storage > Disk Management.
3. Right-click the SSD and select Shrink Volume from the menu.
Figure 17 - Computer Management (Shrink SSD Volume)
4. Enter the figure, which should be equal to amount of system
memory (RAM) in your computer, in "Enter the amount of
space to shrink in MB".
5. Click Shrink (any unallocated file space may be formatted for
storage use).
6. Click the Start menu and type "CMD" in the search box.
7. Click CMD from the found list.
8. Type "DISKPART".
9. At the DISKPART command type "list disk".
10. Type "select disk #" (# is disk number where you want to
create the store partition, so refer to the results obtained from
"list disk" for exact disk number).
11. The message "Disk # is now the selected disk." will appear.
12. Type "create partition primary".
31