Fingerprint Reader (Option) - Clevo P150EM Concise User Manual

Fingerprint Reader (Option)

Install the driver and enroll your fingerprints as instructed
below before use.
Fingerprint Reader Driver Installation
1. Click Option Drivers (button).
2. Click 4.Install Fingerprint Driver > Yes.
3. Click Next.
4. Click the button to accept the license and click Next.
5. Click Next > Install.
6. Click Finish > Yes to restart the computer.
User Enrollment
1. Click Start > Programs/All Programs > AuthenTec True-
Suite.
2. Click Yes when you have identified your fingerprint sensor.
3. Click Yes when you are ready to enroll your fingerprints.
4. Click on the fingerprint diagram to select any finger to enroll.
5. You will be required to enter your Windows password (you will
be prompted to create a password if you have not already done
so) at this point (click OK to confirm the password entry).
6. Swipe the finger until the progress bar reaches 100% to enroll
that finger.
7. You will be prompted to select another finger for enrollment (it is
recommended that you enroll a number of fingers).
8. Click the button to continue once you have enrolled a number of
fingerprints.
9. Enter the required information and click the button to register
your software, or click to register later.
28
10. Your fingerprints will now be enrolled (you may enroll any
additional fingerprints at any time).

Help
Click the Help icon and select a
help topic from the drop-down menu.
Get more help will provide a more com-
prehensive list of help topics.
Settings
Click the Settings button on the menu bar to access the
personalization settings for AuthenTec TrueSuite. Here
you can choose to enable/disable Website Log On, Quick-
Launch, Fast User Switching and the desktop icon. You
can also select the Theme and export/import identities.
Click the Save button to save any changes made.
Figure 15
AuthenTec
TrueSuite -
Settings