Clevo P150EM Concise User Manual page 30

Camera Application
The camera application is a video viewer useful for gener-
al purpose video viewing and testing, and can capture vid-
eo files to .avi format.
1. Run the camera application from the desktop shortcut (it is rec-
ommended that you Set Capture File before the capture pro-
cess - see "Set Capture File" below).
2. Go to the Capture menu heading (if you wish to capture audio
check PC Camera Audio Setup on page
Capture.
3. Click OK (the file location will be displayed in the pop-up box) to
start capturing the video, and press Esc to stop the capture
(you can view the file using the Windows Media Player).
Set Capture File
Prior to capturing video files you may select the Set Cap-
ture File... option in the File menu, and set the file name
and location before capture (this will help avoid acciden-
tally overwriting files). Set the name and location then
click Open, then set the "Capture file size:" and click OK.
You can then start the capture process as above.
24
Reducing Video File Size
Note that capturing high resolution video files requires a
substantial amount of disk space for each file. After re-
cording video, check the video file size (right-click the file
and select Properties) and the remaining free space on
your hard disk (go to Computer, right-click the hard disk,
and select Properties). If necessary you can remove the
recorded video file to a removable medium e.g. CD, DVD
23) and select Start or USB Flash drive.
Note that the Windows system requires a minimum of
15GB of free space on the C: drive system partition. In
order to prevent system problems it is recommended that
you save the captured video file to a location other than
the C: drive, limit the file size of the captured video or re-
duce video resolution.
To Reduce Video Resolution Output Size:
1. Run the camera application from the desktop shortcut.
2. Go to Options and scroll down to select Video Capture Pin....
3. Click the Output Size drop box and select a lower resolution
size in order to reduce the captured file size.