> Raise the clamping lever.
> Pull the presser foot away in a downward direction.
> Insert a new presser foot into the bracket from below.
> Press the clamping lever down.
2.5 Needle and stitch plate
Adjusting the needle stop up/down
You can adjust the position in which the needle should be when the machine stops.
> To alter the needle stop position, tap «Needle stop up/down».
Display
Raising and lowering the needle
With foot control
Prerequisite:
•
The back kick of the foot control can be programmed with the «Raising/lowering the needle» function.
(see page 25)
> To raise or lower the needle, press the foot control downward with your heel.
With handwheel
> To raise or lower the needle, press the handwheel against the machine and turn.
Needle stop position
Needle stops up
Needle stops down
Setting up the machine
29