Connecting Your Smartphone - Jensen VX3016 Operation Manual

Connecting Your Smartphone

1. Jensen Screen Mirroring (SP) app Installation Procedure
Download and install the Jensen Screen Mirroring (SP) app from Google Play
onto your smartphone.
2. Smartphone / Head Unit Bluetooth Connection
In order to have full touch screen control from the head unit screen (via the
Screen Mirroring (SP) app ), a Bluetooth connection is required between your
smartphone and head unit. Refer to the head unit / smartphone documentation
for further information on pairing / connecting devices.
3. Connect Your Smartphone
Most Android smartphones will require an HDMI/MHL adapter in addition to an
HDMI cable with 2 Type A male connectors. These adapters are available at
smartphone retail stores. See head unit documentation for more information
about HDMI/MHL adapters. Connect your smartphone to the HDMI/MHL adapter.
Connect one end of the HDMI cable to the HDMI/MHL adapter. Connect the
remaining end of the HDMI cable to the Jensen multimedia head unit HDMI input
(Rear chassis panel). Consult your smartphone documentation for instructions on
how to access HDMI/MHL on your device.
4. Touch Screen Calibration Start
Launch the Screen Mirroring (SP) app on your smartphone. Using the head unit
touch screen, go to Settings in the Screen Mirroring (SP) app . Scroll down
slightly, and press the Touch Screen Calibration "Start" button.
5. Touch Screen Calibration
Once the touch screen is calibrated, scroll up, and press System Settings to return
to the main Screen Mirroring page. Press Mobile Home Page to access your
smartphone from the touch screen of the Jensen multimedia head unit. Touch
the Car Home Page to return to the Main Source Menu of the head unit. This
calibration is performed once per phone when initially set-up.