Jensen VX3016 Operation Manual page 27

Adjusting the Fader and Balance
The user can adjust front/rear fader settings, L/R balance settings, and
subwoofer levels here.
1. Enter the EQ setup mode.
2. Touch the [
] icon in the EQ interface menu.
Balance - This feature is used to balance the audio output levels between the left
and right side of the vehicle. Touch the  or  icons to change the balance
control settings -14 (Left) to +14 (Right). The setting can also be changed by
touching screen within the grid to move the blue sphere.
Fader - This feature is used to fade the audio output levels between the
front and rear of the vehicle. Touch the  or  icons to change the fade
control settings -14 (Rear) to +14 (Front). The setting can also be changed by
touching screen within the grid to move the blue sphere.
Sub (Subwoofer) - This feature is used to reduce or increase the subwoofer
sound level. Touch the slide bar  or  icons to adjust the subwoofer
volume from -8 to +8. This setting will vary depending on the input level
setting of your subwoofer amplifier.
To exit Balance-Fader, touch the return icon on the top left corner of the screen.