Hamilton Beach 49982 Manual page 6

How to Program the Hot Water Dispenser
1
Press I/O (ON/OFF) button to turn
off hot water dispenser.
How to Empty the Hot
Water Reservoir
Unplug and cool completely. The hot water reservoir must be emptied
if it is being stored or if it hasn't been used in more than one week.
Hold the coffee maker over a sink and pull down on the hot water plug
to remove and drain water. After emptied, replace the hot water plug.
6
2
While holding PROG (program)
button on the hot water dispenser
side, press H and M on the coffee
maker side until the desired start
time (AM or PM) is reached.
3
Once desired start time has been
reached, release PROG button and
current time is displayed.
4
Press PROG button on the hot
water dispenser side to set
the water heater to come on
automatically at the desired
start time. PROG button light
will illuminate green when the
program has been set. Press
PROG button again to cancel
program function.
NOTES:
•
You can program both the hot
water dispenser and the coffee
maker independently.
•
To see programmed time,
press and hold PROG (program)
button once. Press again to turn
program back on.