Video Content Analysis (Vca) - Bosch AUTODOME IP starlight 7000i User Manual

48 en | Alarm
7.2

Video Content Analysis (VCA)

Note: This section of the manual provides an overview of the fields and the options for each
field on the page VCA. This section is not a complete tutorial of setting up VCA. For more
information, refer to the separate manual Video Content Analysis (VCA), available on the
product page for Intelligent Video Analytics. Access the product page on the online product
catalog from http://www.boschsecurity.com/corporate/product-catalog/index.html.
VCA configuration
Select one of the profiles here to activate it or edit it.
You can rename the profile.
1.
2.
Do not use any special characters, for example &, in the name. Special characters are not
supported by the system's internal management.
If you select the option Silent VCA, then the system creates metadata to facilitate searches of
recordings but no alarm is triggered. You cannot change any parameters for this configuration.
If you want to turn off VCA, then select Off.
If necessary, click the button Default to return all settings to their default values. A dialog box
appears with the message, "Configuration of the video content analysis (VCA) will be reset
to factory defaults. The changes will be lost. Click 'OK' to continue." Click OK to
acknowledge the message, or click Cancel.
Scenario
Scenarios are applications with pre-defined settings that are adapted to specific use cases. All
relevant settings, from tasks to metadata, are set automatically by the system.
The following scenarios are available:
–
–
–
–
–
Notice!
A camera calibration is required for all scenarios.
Using the scenarios will reset the VCA configuration to the scenario defaults.
All values (Metadata Generation and Tasks) can be edited after activating the scenario
defaults.
Delete tasks that do not fit your use cases.
Analysis type
Select the appropriate option for Video Content Analysis: MOTION+, Intelligent Video
Analytics, or Intelligent Video Analytics Flow.
Note: When you select another analysis type, a dialog box appears with the message,
"Changing the analysis type resets motion and tamper parameters." Click OK to
acknowledge the message (and to switch analysis types), or click Cancel.
Alarm status
The alarm status is displayed here for information purposes. This means you can check the
effects of your settings immediately.
2020-07 | v0.7 |
To rename the file, click the icon to the right of the list field and enter the new profile
name in the field.
Click the icon again. The new profile name is saved.
Intrusion (one field)
Intrusion (two fields)
People counting
Traffic incidents
Traffic wrong way
User Manual
AUTODOME IP starlight 7000i
Bosch Security Systems