BMW G 650 GS Sertao Rider's Manual page 88

8
86
Turn bulb 2 clockwise to install
it in the bulb housing.
z
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
Install screw 1.
Replacing rear-light and
brake-light bulb
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove two screws 1 and re-
move the rear-light glass.
Press bulb 2 into its socket
and turn it counter-clockwise to
remove.